HCC-500-1
HCC-500-1
HCC-500-1 heating cooling chamber has been designed for burn-in testings. The unit can be operated and programmed from the touch screen terminal, located on the front side of electric cabinet.
The plate can reach temperatures in range of -90 to +150 oC.
Target temperature of the plate or module is defined in the pre-programmed recipes and controlled by electrical heating element and liquid nitrogen according to recipe.
 |
|
- The plate can reach temperatures in range of -90 to +150 oC
- The unit can be programmed for up to five different recipes. Each recipe contains five parameters: Ramp Time, Target Temperature, Dwell time, Check-on and Power on-off
- The unit is equipped with plastic chamber to keep the plate under dry condition. This achieved by constant dry N2 flow to the chamber
- The unit is controlled by local touch screen operation
|
|
Options:
| Oxygen Analyzer |
(by customer) |
| General dimensions |
could be modify according to
customer requirements |
Working area
|
could be modify according to
customer requirements |
|
|
 |
 |
|
Dimensions
| |
Height |
Width |
Depth |
| Plate |
17 mm |
160 mm |
210 mm |
| Plate working area |
67 mm |
170 mm |
220 mm |
| Chamber |
500 mm |
230 mm |
278 mm |
| Control panel (for 19” rack) |
220 mm |
480 mm |
|
Maximum heating rate 15 oC/min
Maximum cooling rate 10 oC/min
Temperature -90 to 150 oC
|
Utilities Needed
Liquid N2 Pressure 100 psi Max.
Gas N2 Flow 50 lpm Max.
Gas N2 Pressure 60 psi
Electrical
Supply 220 VAC 12A, 50 Hz
|
|
Construction Materials
Working surface Aluminum
Gas Chamber Perspex
|